System Components
INDUSTRONIC offers different modular system components for the connection of INDUSTRONIC intercom stations, speakers and other terminal devices as well as the possibility to integrate third-party systems.
The system components are designed for installation into industrial 19" cabinets.
PMOD 1 XCO 001
X-Controller Module
Features and Functions
- Controller for Intercom, PA/GA and PA solutions with up to 400 terminal devices
- Networking of up to 250 X-Controllers
- Control of warning sequences
- 4 Gigabit Ethernet interfaces for flexible network connection
- 12 bidirectional potential-free control inputs and outputs
- Power supply of the internal electronics via PoE (with redundancy) or separate DC supply
- Integrated self-monitoring
- Configuration via INDUSTRONIC management tools
PMOD 8 XDG 001
Digital Gateway Module
Features and Functions
- Connection of up to 8 digital INDUSTRONIC terminal devices via 2-wire technology
- 2 Ethernet interfaces for redundant network connection
- Redundant connection of terminal devices to 2 different XDG modules possible
- Integrated self-monitoring
- Permanent automatic monitoring of all connected terminal devices, connection cables, and power supplies
- Configuration via INTRON-X management tools
PMOD 24 XIO 001
I/O Module
Features and Functions
- 24 bidirectional potential-free control inputs and outputs
- 2 Ethernet interfaces for redundant network connection
- Power supply of the internal electronics via PoE (with redundancy) or separate DC supply
- Integrated self-monitoring
- Configuration via INDUSTRONIC management tools
PMOD 6 XAL 001
Analog Line Module
Features and Functions
- 6 analog audio interfaces with
- 2 x 4-wire audio (full duplex)
- 4 x 2-wire audio (half duplex)
- 24 bidirectional potential-free control inputs and outputs
- 2 Ethernet interfaces for redundant network connection
- Power supply of the internal electronics via PoE (with redundancy) or separate DC supply
- Integrated self-monitoring
- Configuration via INDUSTRONIC management tools
PMOD 4 XBC 001
Beacon Control Module
Features and Functions
- Control of up to 4 AC or DC flashing warning beacon circuits
- Flashing warning beacons can be wired as line or loop
- Xenon, LED, etc.
- 115 / 230 V AC
- 24 / 48 / 60 V DC
- Continuous automatic line monitoring of the flashing warning beacons for cable break, short circuit and ground leakage (option)
- 2 Ethernet interfaces for redundant network connection
- Power supply of the internal electronics via PoE (with redundancy) or separate DC supply
- Integrated self-monitoring
- Configuration via INDUSTRONIC management tools
Exchange Control Board
1 DXC 04
Features and Functions
- Connection of up to 192 digital or analog intercom stations
- Addressing of up to 65,000 stations, speaker circuits, etc.
- Switching of up to 120 simultaneous communication links
- Connection of IP-based intercom stations
- IP-based system interconnection via integrated Ethernet interfaces
- LEDs to indicate operation, data transmission and errors
Linecard for 12 Digital Intercom Stations
12 DDL 02
Features and Functions
- Management of up to 12 digital intercom stations
- Permanent monitoring of the connected intercom stations and connection cables (interruptions, short circuits)
- Green LED to indicate operation, red LED to indicate failures
- One green LED per each intercom station to indicate incoming and outgoing AF signals
- One red LED per each intercom station to indicate specific intercom station failures
Linecard for 12 Analog Intercom Stations
12 DAL 03
Features and Functions
- Management of up to 12 analog intercom stations
- Management of 48 line inputs / outputs
- Protected line outputs against short circuits and overvoltage
- Blinking LED indicates an outgoing AF signal
- Shining LED indicates an AF source
- Red LED indicates failures
- Hot swapping of the linecard
IP Interface for Analog Systems
NSG 001
Features and Functions
- Interface to analog systems, with galvanic isolation
- 3 potential-free inputs and outputs
- Expandable to up to 27 potential-free inputs and outputs
- Alternative wiring: bidirectional inputs/outputs
- 4-wire AF interface with adjustable AF level
- Continuous monitoring of network interface
- PoE and/or external power supply
- Integrated web interface for setting and service functions